Figure 19 Application variables
The application variables are divided into three tabs:
•
System Params
– group of general system parameters.
•
Coil Params
– enables access to the variables related to the coils control
•
Calibration
– group of parameters for calibration of the input current, input voltage, and foreign
objects detector
The meaning of each parameter is described next to the text field.
NOTE
•
Some parameters of System Params and Coil Params are not used
for MP-A9. The used parameters are described in
WCT1011A/WCT1013A Automotive MP-A9 Run-Time User’s
Guide
.
•
The parameters of Calibration can be changed at run-time. But the
parameters of System Params and Coil Params cannot take effect
immediately. These parameters should be saved to project, rebuild
project, and re-flash the board.
WCT1011A/WCT1013A Automotive MP-A9 Wireless Charging Application User’s Guide, Rev. 0, 10/2017
20
NXP Semiconductors
