NXP Semiconductors
UM10276_1
TED-Kit 2 User Manual
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
User manual
Rev. 1.29 — 20 August 2010
41 of 79
New messages are always appended at the beginning of the list. The message view
ensures that always the latest messages are shown. The message view holds 1000
messages. If this limit is reached, the oldest messages are discarded.
The message list shows for each message the command and its parameters and when it
was send. The triangle to the left can be clicked to show more detailed information such
as the status code of executing the command, trace data showing what the TED-Kit 2
firmware actually did and the result of the operation.
Red rows indicate that an error happened during the execution of the command.
Note: The trace information with detailed data about the execution steps done by
the TED-Kit 2 firmware is available only if the DEBUG version of the firmware is
running.
6.4.1 Context menu
The message view offers a context menu available at right-clicking directly inside the
message view.
Fig 56. Message view context menu
For each tab, the data can be selected, copied or cleared with command from the context
menu available while right-clicking in the message view area:
Select All
Selects all the messages/text shown in the current message view.
Copy
Copies the current selection of messages/text to the system clipboard.
Clear All
Clears the content of the currently visible message view.
Pause Updates
No more text/messages are added to the currently active view. The messages are
cached and added immediately after Pause Updates is deactivated.
