NXP Semiconductors
UM10276_1
TED-Kit 2 User Manual
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2010. All rights reserved.
User manual
Rev. 1.29 — 20 August 2010
37 of 79
Fig 53. TED-Kit 2 unsupported hardware dialog
The current instance of the GUI is not certified to work with (the outdated) main board
revision 1 and thus, disables the TED-Kit 2.
To solve this conflict, either update to the latest version of the TED-Kit 2 software or get
the latest version of the main boards or install an older version of the TED-Kit 2 software
which supports your main boards.
To see what hardware is supported by the GUI, look in the Firmware folder of the instal-
lation folder. It contains files with names like 03-001019-r.hex. The first number indicates
the hardware revision supported (01, 02 …). Only boards with hardware revisions found
in this folder can be used together with this GUI.
6. Reference
The section explains all elements of the GUI, what they do and when they can be used.
The elements are organized in groups; each group represents one module (e.g. window)
of the interface.
6.1 Menu bar
The menu bar of the main window contains the following menus and sub-menus:
6.1.1 Board
This menu contains the functions for the TED-Kit 2 board and its XBoards.
TED-Kit 2 Status…
Opens the TED-Kit 2 status window for the currently in the hardware view selected TED-
Kit 2 or for the TED-Kit 2 of the currently selected XBoard. The menu is disabled if no
TED-Kit 2 or no XBoard is selected. For details of this win
7.5, page
43.
Identify TED-Kit 2
Flashes the 4 status LEDs of the currently in the hardware view selected TED-Kit 2 or for
the TED-Kit 2 of the currently selected XBoard. The menu is disabled if no TED-Kit 2 or
no XBoard is selected.
Debug TED-Kit 2 Firmware
Shows the type of the firmware of all currently connected and activated TED-Kit 2 box. A
checkmark at the left side of the menu entry indicates that the debug version of the firm-
ware is currently used by all TED-Kit 2 boxes. No checkmark indicates the release ver-
sion of the firmware is used.
Clicking the menu will toggle the firmware type and run the firmware update sequence for
all currently connected and active TED-Kit 2 boxes.