13
P2
Dual-port
RJ45 connector
Ethernet port with Magnetics for
1000BASE-T/100BASE-TX
P4A(bottom)
P4B(top)
Connects to RJ45 Ethernet cable
P3
Dual-port
RJ45 connector
Ethernet port with Magnetics for
1000BASE-T/100BASE-TX
P3A(bottom)
P3B(top)
Connects to RJ45 Ethernet cable
P4
Single-port
RJ45 connector
Ethernet port with Magnetics for
100BASE-TX
Connects to RJ45 Ethernet cable
P5
Single-port
RJ45 connector
Ethernet port with Magnetics for
1000BASE-T/100BASE-TX
Connects to RJ45 Ethernet cable
2.6 Buttons
The table below describes the buttons of the S32G-VNP-GLDBOX.
Table 7. The buttons of the S32G-VNP-GLDBOX
Part
Name
Description
SW1
POR_B
Press SW1 to reset the system.
S32G274A will perform a power-on reset.
SW2
RESET_B
Press SW2 to reset the system.
S32G274A will perform functional reset.
SW16
NMI
Press SW16 to assert non-maskable interrupt.
2.7 Power switch
The table below describes the power switch of the S32G-VNP-GLDBOX.
Table 8. The power switch of the S32G-VNP-GLDBOX
Switch
Default setting
Description
SW15
POS. 1
The SW15 is an SPDT switch.
The figure below shows the 3-position of actuator.
Switch Actuator Position
If the actuator is moved to POS. 1, the power supply is input from the
Power Jack(J176)
