NXP Semiconductors
UM11079
IoT Module base board
UM11079_OM40006.docm
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017, 2018. All rights reserved.
User manual
Rev. 1.0
— March 20, 2018
4 of 23
2. Feature summary
The OM40006 board includes support for the following features (availability of these
features depends on the capabilities of the installed IoT Module):
•
On-board, high-speed USB based, Link2 debug probe with CMSIS-DAP and
SEGGER J-Link protocol options for debug of installed module
o
UART bridging from installed Module to USB (via debug probe)
o
Can be used with external debug probe connected to target Module
o
On-board Link2 can be used to debug off-board target
•
2 x user LEDs
•
Target Reset, ISP/User (3) and User buttons
•
Arduino UNO compatible expansion site
•
On-board 3.3V regulator with external power supply options
•
128Mb Winbond SDRAM
•
Knowles SPH0641LM4H digital microphone
•
Micro SD card slot
•
NXP MMA8652FCR1 accelerometer
•
Stereo audio codec with line in/out
•
Full speed USB port with micro A/B connector for host or device functionality
•
10/100Mbps Ethernet (RJ45 connector)
•
272x480 color LCD with capacitive touch screen
2.1 Board layout and settings
This section provides a quick reference guide to the main board components,
configurable items, visual indicators and expansion connectors. The layout of the
components on the OM40006 board is shown in Fig 2 below:
Downloaded from
Downloaded from
Downloaded from
Downloaded from