NXP Semiconductors
UM11079
IoT Module base board
UM11079_OM40006.docm
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017, 2018. All rights reserved.
User manual
Rev. 1.0
— March 20, 2018
3 of 23
1. Introduction
The OM40006 IoT Module Baseboard is designed to provide access to the broad range
of peripherals available on NXP WiFi-enabled IoT modules, such as the LPC54018 IoT
Module (OM40007). The board includes a debug probe based on the LPC-Link2 design
used in many of NXP’s range of LPCXpresso boards, and in the standalone debug LPC-
Link2 probe (OM13054). The combination IoT Module and this baseboard are supported
by NXP’s MCUXpresso suite of tools, including a fully featured, Eclipse-based IDE and
an SDK which includes drivers, middleware and example applications. The SDK also
includes ready to use projects for IAR EWARM and Keil MDK tools. Note that the
OM40006 Baseboard is sold standalone (i.e. modules are sold separately.)
Fig 1.
IoT Module Baseboard underside view (no module fitted)
This document describes the hardware of the OM40006 board. The following aspects of
interfacing to the board are covered by this guide:
• Main board features
• Setup for use with development tools
• Board interface connectors
• Jumper settings
Downloaded from
Downloaded from
Downloaded from