1. Introduction
This user guide details the setup and configuration of the NXP MPC5748G Low Cost Evaluation
Board (hereafter referred to as the LCEVB). The LCEVB is intended to provide a mechanism for easy
evaluation of the MPC5748G family of microcontrollers, and to facilitate basic hardware and software
development.
Note that the LCEVB has a limited feature set compared to the main MPC574xG customer EVB and is
intended for evaluation purposes. Customers moving to serious development activities are recommended to
purchase the fully functional customer EVB which also has device specific daughter cards.
The LCEVB is intended for bench / laboratory use and has been designed using normal
temperature specified components (+70° C).
This product contains components that may be damaged by electrostatic discharge. Observe
precautions for handling electrostatic sensitive devices when using the LCEVB.
The user guide is intended to be read alongside the respective MCU documentation available at
www.nxp.com
and
includes:
Reference Manuals
Product Data Sheets
Application notes
Device Errata
2. LCEVB Features
The LCEVB provides the following key features:
Single 5 V DC external power supply input with on-board 3.3 V regulator. Power is supplied via
a 2.1 mm barrel style power jack.
Simple jumper less configuration (enhanced configuration is possible via 0 Ohm Resistors
and optional jumpers if required).
Master power switch and regulator status LED.
USB Serial interface.
2 x High Speed CAN transceiver routed to 3-way headers.
2 x LIN interfaces routed to 3-way headers.
Main clock supplied from on board crystal.
User reset switch with reset status LED’s.
Ethernet PHY and RJ45 socket (configured for MII mode).
USB Type A Host interface.
2 x FlexRay interfaces with standard 2-pin connectors.
14-pin JTAG connector.
MPC5748G Low Cost EVB User Guide, Rev. 1, 08/2016
3
NXP Semiconductors
Downloaded from
Downloaded from
Downloaded from
