WCT1012VLF/WCT1013VLH Consumer MP-A11 (WCT-
15W1CFFPD) V1.0 Wireless Charging Application User’s
Guide, Rev. 1, 05/2019
48
NXP Semiconductors
Figure 60. WCT1013 build configuration
8.3. Functional description
NXP provides full-featured wireless charging functions on the reference board. If a certain function is
not needed, disable it by the definitions in the header file.
FreeMASTER
•
FreeMASTER is supported. The following configuration is used to enable or disable it.
Table 2.
FreeMASTER configurations
Configurations
Default value
Location
Description
FREEMASTER_SUPPORTED
TRUE
appcfg.h
Enables or disables the function. Set
TRUE to enable it. Set FALSE to
disable it.
•
FreeMASTER communication interface configuration is in
freemaster_cfg.h
. The SCI
interface is enabled and the JTAG interface is disabled by default. Only one interface can be
set at a time.
#define FMSTR_USE_SCI 1 /* To select SCI communication interface */
#define FMSTR_USE_JTAG 0 /* 56F8xxx: use JTAG interface */
•
The FreeMASTER SCI port is SCI0 by default.
1)
#define FMSTR_SCI_BASE 0xE080 /* base address of SCI_0 */
The macro is in
freemaster_cfg.h
.
2)
#define QSCI_FREEMASTER_INDEX 0 //QSCI0
The macro is in
qsci.h
.