WCT1012VLF/WCT1013VLH Consumer MP-A11 (WCT-
15W1CFFPD) V1.0 Wireless Charging Application User’s
Guide, Rev. 1, 05/2019
NXP Semiconductors
19
•
QFactor
This block contains the variables for the Q factor detection.
•
Test
This block contains some variables for debugging.
•
Protection
This block contains protection variables, such as the input voltage protection, input current
protection, and temperature protection.
NOTE
Besides the above variables, all the global variables can be added to
FreeMASTER. The procedure to generate and add variables to the watch
window is described in the FreeMASTER user manual.
5.3. Application parameters modification
The application parameters (NVM parameters) can be easily viewed and changed in the control panel.
The control panel contains the web page elements (buttons, check boxes, and text fields) that enable a
user-friendly way to visualize and change the application control parameters.
Figure 19. Application variables
The application variables are divided into these tabs:
•
“Op Params”—enables access to variables related to the operation control.