NXP Semiconductors LPC55S36-EVK, User Manual, Page: 48 / 49

Appendix A
Revision History
The table below summarizes the revisions to this document.
Table 29. Revision history
Revision Date Topic cross-reference Change description
Rev. 1 24 January 2022 Jumpers
• Removed jumper JP30 details
• Changed default settings of jumpers JP41,
JP42, JP43, JP44, JP45, JP46, JP50, JP51,
JP52, JP53, JP63, JP64, JP65, JP66, JP67,
JP68, and JP69
• Added new jumpers JP72, JP73, JP74, JP75,
JP76, JP77, JP78, JP79, and JP80
Power supplies In Table 9 , changed power supply for onboard
DMIC and external DMIC connector from VCC_1V9
to VCC_3V3_1V9
Current measurement Added as a new section
Octal flash memory Updated Table 21 and text above it
DMIC and external
DMIC connector Added a new paragraph at the end of the section
mikroBUS socket
• Updated Figure 12
• Removed the "Example click boards" table
Motor 1 c unused
MCU pin socket Updated signals at pins 13 and 15 of connector J12
in
Figure 13
Board errata Updated the section
MCU-Link Debug Probe Restructured the chapter
MCU-Link overview Updated the section
Using MCU-Link with
development tools Updated the section and removed its subsections
Supported debug scenarios Updated Table 25
Rev. 0 15 September 2021 Initial release
NXP Semiconductors
LPC55S36-EVK Board User Manual, Rev. 1, 24 January 2022
User Manual 48 / 49