Table 6. LPC55S36-EVK jumpers (continued)
Part identifier
Jumper type
Description
Reference section
• Pins 2-3 shorted (default setting): Jumper
JP46 pin 3 sends/receives PWM data to/
from Motor 2 + Arduino socket connector
J102
JP50
1x3 pin header
Target MCU pin PIO1_21 function control
jumper:
• Pins 1-2 shorted: Target MCU pin PIO1_21
sends/receives I2C data
• Pins 2-3 shorted (default setting): Target
MCU pin PIO1_21 sends/receives PWM
data
JP51
1x3 pin header
Target MCU pin PIO1_23 function control
jumper:
• Pins 1-2 shorted: Target MCU pin PIO1_23
provides I2C clock input
• Pins 2-3 shorted (default setting): Target
MCU pin PIO1_23 sends/receives PWM
data
JP52
1x3 pin header
Target MCU pin PIO1_25 function control
jumper:
• Pins 1-2 shorted: Target MCU pin PIO1_25
acts as UART/GPIO pin
• Pins 2-3 shorted (default setting): Target
MCU pin PIO1_25 acts as PWM pin
JP72
1x3 pin header
Target MCU pin PIO0_22 signal selection
jumper:
• Pins 1-2 shorted (default setting): Target
MCU pin PIO0_22 connects to LED_GREEN
signal
• Pins 2-3 shorted: Target MCU pin PIO0_22
connects to USB0_VBUS signal
JP73
1x3 pin header
Target MCU pin PIO0_17 signal selection
jumper:
• Pins 1-2 shorted (default setting): Target
MCU pin PIO0_17 receives interrupt signal
from mikroBUS socket (connector J8) / SW3
button
• Pins 2-3 shorted: Target MCU pin PIO0_17
communicates to audio codec
Table continues on the next page...
NXP Semiconductors
LPC55S36-EVK Overview
LPC55S36-EVK Board User Manual, Rev. 1, 24 January 2022
User Manual
21 / 49