Getting Started
KT34FS6407-34FS6408UG User’s Guide Rev. 1.0 8/2015
4
Freescale Semiconductor, Inc.
2
Getting Started
2.1
Kit Contents/Packing List
The KIT34FS6407EVB and KIT34FS6408EVB contents include:
• Assembled and tested evaluation board/module in anti-static bag
• Warranty card
2.2
Jump Start
Freescale’s analog product development boards help to easily evaluate Freescale products. These tools support analog mixed signal and
power solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices
utilizing power, SMARTMOS and MCU dies. Freescale products enable longer battery life, smaller form factor, component count reduction,
ease of design, lower system cost and improved performance in powering state of the art systems.
• Click on the appropriate link for your board
KIT34FS6407EVB:
www.freescale.com/KIT34FS6407EVB
KIT34FS6408EVB:
www.freescale.com/KIT34FS6408EVB
• Review your Tool Summary Page
• Look for
• Download documents, software, and other information
Once the files are downloaded, review the user guide in the bundle. Jump start bundles are available on each tool summary page with the
most relevant and current information. The information includes everything needed for design.
2.3
Required Equipment and Software
To use this kit, you need
• 2.7 V to 40 V power supply, 3.0 A capability
• Freescale’s KITUSBSPIDGLVME interface dongle
• SPIGen Graphical User Interface or MC3390X_GUI
When not connected to an evaluation board, the KITUSBSPIDGLVME can be used in standalone mode to program its
onboard MC68HC908JW32 microcontroller. In this case, the interface dongle and USB cable are required. For more
information, see the “
”.
2.4
System Requirements
The kit requires the following:
• USB-enabled PC with Windows
®
XP or higher
Jump Start Your Design