NXP Semiconductors
JN5189
JN5189-DK006 Development Kit User Guide
UM11368
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2020. All rights reserved.
User Guide
Rev.1.1
— 28 April 2020
13 of 21
5. Light expansion board
This expansion board is available in the development kit and is compatible with Arduino
shields. They are supplied pre-fitted with Arduino-compatible header of Carrier Boards in
the development kit.
The Generic Expansion Board has the following features:
•
Arduino-compatible expansion header (in four parts, CN1-CN4)
•
3 White LEDs (D1, D2, D3) connected to IO6 on the JN5189 module
on the Carrier Board:
o
D4 is an optional LED which is not fitted on the supplied
board and shares IO4 with button SW1
•
RGB LED controlled by I2C
•
2 Digital Microphones connected to DMIC interface in the JN5189
•
1 Temperature Sensor (IC8) connected by I2C
•
1 gyroscope (IC6) connected by I2C
•
1 Light Sensor (G1) connected by I2C
•
1 Accelerometer & Magnetometer (IC9) connected by I2C
Figure 8 Lighting expansion board
