NXP Semiconductors i.MX 8M Nano Quick Start Manual Download Page 12

www.nxp.com/iMX8MNANOEVK

NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of 
their respective owners. © 2019 NXP B.V. 

Document Number: IMX8MNANOQSG REV 0  
Agile Number: 926-45698 Rev A

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)  This device may not cause harmful interference, and
(2)  This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s 
authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be 
determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
The following information is provided per Article 10.8 of the Radio Equipment Directive 2014/53/EU:
(a)  Frequency bands in which the equipment operates.
(b)  The maximum RF power transmitted.

PN

RF Technology

(a) Freq Ranges (EU)

(b) Max Transmitted Power

8MNANOD4-EVK

WLAN 2.4 GHz Mode 802.11b/g/n 2412 MHz – 2472 MHz

19.5dBm

WLAN 5 GHz Mode 802.11a/n/ac

5180 MHz – 5825 MHz

17dBm

BLE

2402 MHz – 2480 MHz

9dBm

BT BR/EDR

2402 MHz – 2480 MHz

10.5dBm

EUROPEAN DECLARATION OF CONFORMITY (Simplified DoC per Article 10.9 of the Radio Equipment Directive 2014/53/
EU)

This apparatus, namely 8MNANOD4-EVK, conforms to the Radio Equipment Directive 2014/53/EU.
The full EU Declaration of Conformity for this apparatus can be found at this location: 

www.nxp.com/i.MX8MNANO

Summary of Contents for i.MX 8M Nano













Reviews: