NXP Semiconductors
AN12550
PNEV5190B evaluation board quick start guide
A reference example uses secure download library, which provides the implementation of
the secure download APIs. It is recommended to use it in the customer application.
4.3.1 Preconditions
It is required to set up the system comprising the PNEV5190B evaluation board and
LPC-Link2 or Segger J-Link, as shown in the figure below.
To be able to use the prepared software package, all components listed in the table
below are required:
Device
Version
Description
PNEV5190B
1.0 or higher
PNEV5190 Customer evaluation board (hardware)
LPC-LINK2
1.0
Standalone debug adapter (hardware)
MCUXpresso IDE 11.2.0 or higher
Development IDE (PC software)
Table 2. Development Environment
The next figure shows how to connect the PNEV5190B Development board with Segger
J-Link and PC. The development board in this setup is powered by USB (which is not
recommended if the RF Front-End is used).
Figure 14. System setup
Before continuing, it is necessary to download the latest PN5190 SW release package
and extract it to an empty folder.
4.3.2 Import reference project
To import secure firmware update project, follow steps below:
1. Open MCUXpresso IDE in a new workspace
2. Import project from the previously extracted folder
AN12550
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2021. All rights reserved.
Application note
Rev. 1.5 — 23 April 2021
COMPANY PUBLIC
562315
18 / 37
