NVX XEQ7, User Manual

Page: 13 / 24

WARNING!
To prevent short circuits during installation, always disconnect
the vehicle’s negative (-) battery lead before making any
connections.
•
This unit is exclusively for vehicles with a negative ground, 12V battery system.
•
A good chassis ground connection is critical to minimize resistance and avoid
noise problems. Use the shortest wire possible and securely connect it to the
car chassis and the source unit ground.
•
When routing RCA cables, keep the cables away from the power cables and
output speaker wires.
•
If you are using a source unit without a remote turn-on lead, the XEQ7 can be
turned on with a switched accessory lead. This accessory power source is located
in the factory harness at the back of the radio. This lead turns on and off with the
ignition key.
•
Do not open the case. There are no user-serviceable parts inside. If you require
assistance, consult your NVX dealer or an authorized NVX service center.