Nvis901
MTC Mode:-
1. To enable MTC press ‘
Enter
’ key one’s and following screen appear (Fig 4.)
Fig 4.
2. For temperature adjustment use ‘
UP
’ for increasing temperature. And ‘
Down
’ key for decreasing
the temperature.
3. To out form temperature adjust press
‘ESCAPE’
key.
4. By this MTC is enabled and MTC appear on display in place of ATC (Fig 6.)
Fig 5
5. For disable the MTC press ‘
Down
’ key for three second
.
6. The MTC range is form 0 to 80°C. So if user try to adjust above or below this range then “Over
range” message displayed.
Nvis Technologies Pvt. Ltd.
10