5 Software installation
5.2 System setup using the VCA Manager
5
Software installation
5.1
System setup using Linux commands
When booting and the Quadro VCA is connected on interface
eth3
to local network DHCP
will be used by default.
A unique hostname is preset.
To change the default settings (hostname, IP address, default route), log in either on the
console or per ssh as user
iray
and run:
sudo system-config-network
This will modify the following system files:
•
/etc/sysconfig/network-scripts/ifcfg-eth<N>
•
/etc/sysconfig/network
•
/etc/hosts
Note:
Contact your network system administrator to add the hostname of the Quadro
VCA to DNS.
5.2
System setup using the VCA Manager
Network settings can be changed from the VCA Manager interface if you are not familiar
with Linux.
1 Connect a second machine (for example, your laptop) to the configuration port
eth2
.
2 Set this second machine to any IP address from the 192.168.124.0 network.
3 Connect to
http://
VCA-IP-address
.
14
NVIDIA Quadro Visual Computing Appliance — Installation Guide
©
2016 NVIDIA Corporation
