38
2.
Connect VGA-PT synchronizer(c) 15-pin male
connector (d) to graphic card's VGA output
signal port (i).
3.
Screw in the bolts(g) solidly.
4.
Connect monitor's VGA signal input cable (b) to
VGA-PT synchronizer(c) 15-pin female
connector (e).
5.
Connect 3D LC shutter glasses' plug (k) to
VGA-PT synchronizer(c) glasses jack (f).
Please make sure that the plug is
connected all the way to the end
.
6.
The installation of 3D glasses is done. Please
turn on power of the computer, and boot up PC
to Windows environment.
Special Note:
•
After the completion of 3D glasses’ installation, please do
not disconnect VGA-PT synchronizer anytime when your PC is
powered on. Be sure to turn off the power of your PC anytime
before you want to connect or disconnect VGA-PT
synchronizer.
