nVent.com
|
24
Raychem-AR-H
58686
-NGC
40
DemoUnit-EN-
1805
Step
5
–
NGC-
40
Demo Simulation panel
• Set the NGC-
40
DEMO panel control knobs as shown below.
• If the TOUCH
1500
software displays an "Alarm Ack" window in the upper right corner after you set the control knobs, press the ALARM
RESET button located on the HTC.
Step
6
–
Creating a High Temperature Alarm
Rotate the
TS
1
switch on the NGC-
40
Demo to create an HIGH temperature alarm. Notice after a few seconds the “Alarm Ack” message
in the upper right corner of the screen.
Step
7
–
Acknowledging the Alarm
Click on the
Alarm List
tab. You should now see a Control Temperature High alarm.
The NGC-
40
-HTC module should also indicate a TS alarm.
