Specification
Tuner
Hold the TAP button for 1.5 seconds. Speaker will be muted when the tuner is activated. You can find the string notes (For standard E
tuning only) on the panel. Channels and the TAP button will flash when you hit the related string. MOD, DLY and RVB buttons will show
the string pitch.
Press and hold the CLN and OD buttons for 1.5 seconds, all of the channel lights will start to blink, press any channel button.
If you want to cancel the factory reset process while the lights are blinking, press TAP button.
*Specifications and appearance subject to change without notice.
20W RMS into 4Ω
INPUT: -10 dBu @1 M ohm
AUX IN: -10 dBu
20 cm (8 inches)
AC adaptor
(
DC 15V
)
1.85A
Maximum Power Output
:
Nominal Input Level (1kHz)
:
Speaker
:
Power Supply
:
Current Draw
:
CE mark for European Harmonized Standards
CE Mark which is attached to our company's products of Battery mains the product is in fully conformity with the harmonized standard(s) EN
61000-6-3:2007+A1:2011 & EN 61000-6-1:2007 Under the Council Directive 2004/108/EC on Electromagnetic Compatibility.
2018 Cherub Technology-All rights reserved. No part of this publication may be reproduced in any form without prior written permission of Cherub Technology.
C
Made in China
R
oH
www.nuxefx.com
08
09
Saving Presets
You can save your dial-ups with all parameters. Gain, Level, EQ and digital effects including TAP TEMPO.
Press and hold the selected channel button for 1.5 seconds, the selected channel button will start to blink, press the same channel
button again.
If you want to cancel the saving process while the light is blinking, just press any other channel button.
Dimensions
:
Weight
:
Accessories
:
380(L)x186(W)x325(H) mm
6.6Kg
Owner's manual AC adaptor
Factory Reset
E
B
G
D
A
E
1st
2nd
3rd
4th
5th
6th
Standard E tuning on guitar
CLN: B
OD: G
METL: D
LEAD: A
TAP: E
MOD: Pitch is FLAT DLY : In TUNE RVB : Pitch is SHARP
st
th
(1 and 6 strings)
Press any button to exit tuner.