Nu-Link-Gang
Dec. 23, 2019
Page
14
of 37
Rev 1.00
NU
-LINK
-GA
NG
USE
R MA
NU
AL
2.
Load the firmware image files to the corresponding flash region.
3.
Set the Config Bits by the using IC series.
4.
Select the programming area.
5.
Set the program option. It is necessary to select the “Offline Programming Mode” option.
6.
Click “Start”. The ICP Programming Tool will start loading the firmware image files to the Nu-
Link-Gang.
User needs to repeat section 3.3.1 and 3.3.2 to load firmware image file to every programming unit.
1.Connect
2.Load File
3.Config Bits
4.Programming
5.Option
6.Start
5.Option
Figure 3-2 ICP Programming Tool Setting
3.3.3 Import/Export Project
The user settings of the ICP Programming Tool can be save and load by import or export the .icp
project file. It can also do the binary code protection through exporting with a ceritificate.
Figure 3-3 ICP Programming Tool Import/Export Project
