nuvowater
.com
877-688-6426
6
7
Securely connect water supply line inlet & outlet to the nipples in the Housing
Head. Softener functionality requires the correct water flow direction; make sure
water supply inlet pipe is attached to the inlet port. (Note: Ports on Housing
Head are marked “IN” and “OUT”). See FIG. 2
Ports are marked “IN” and “OUT”
Cartridge must be inserted so
holes are at the top.
8
Check that the O-ring is properly seated inside
the Housing Body.
9
Remove shrink wrap material and packing foam
ring, then insert Cartridge into Housing Body.
Make sure holes on side of cartridge are located
at the top. See FIG. 3
10
Attach the Collar (turn counter-clockwise or right)
and use the Wrench provided to securely tighten
the Housing Body to the Housing Head.
11
Turn on the main water supply. Be sure Housing
Head is turned to the “Softener” position.
FIG. 2
FIG. 3
PLEASE NOTE: For maximum efficiency, please do not use the system
immediately. Allow the new cartridge to remain in the housing with
minimal water flow for one hour.
Summary of Contents for DPHB
Page 1: ...Installation Guide ...
Page 12: ...877 688 6426 nuvowater com ...
