Nuvo NV-CR100, Manual

Page: 13 / 31

13
2.4 Join My Existing System
If you are controlling the system with a third party smart phone or tablet and you
have downloaded an app that has never been associated with an existing system,
you will be prompted to join the existing system. Once the process is complete it will
not be necessary to repeat.
3. Add Players to the System
When the connection to the network is complete and communication is established,
a prompt will appear to add zones to the system. When the “Add Zone” button is
touched, you will be given a screen of zone icons. Establishing a new zone is simply
completed by touching the desired zone icon.
Touching the “Edit Zone Name” button will produce a keyboard and the ability to type
a customized name.
3.1 Associating a zone icon with a Zone Player
Each new zone name must be associated with the appropriate Player.
Place the Player in its desired location within the home, plug it into an electrical
outlet and place the power switch on the back panel in the ON position. The power
LED on the front panel will flash momentarily while the Player is booting. When it
stops flashing, the Player is ready for operation. Touch the
Volume Up and Mute
buttons on the Player simultaneously.
The control app will indicate that the Player is connecting to the System. The control
app will indicate when the Player is connected. Touch the “Next” button and either
select “ Add” to repeat the process of adding a new zone, or “Done” indicating that all
of the desired zones have been added to the System. Touch the “Finish” button to
complete the process.
3.2 Connecting Speakers to the Zone Player
Floor standing, in-ceiling, in-wall or bookshelf speakers can be used with the Zone
Players. The Players have a high-end brass 5-way binding post that can be
terminated by unscrewing the post to expose a hole. Insert the stripped portion of the
incoming speaker wire into the hole and screw the post back down onto the wire until
it is firmly secured. Make sure that the positive (red) terminal and negative (black)
are matched to the termination on the speakers. Crossing these will cause the
speakers to be “out of phase” and will severely hamper the speaker’s output.
Another method for termination is to terminate the wire into a standard “ banana”
connector and insert that into the end of the Player’s binding posts left and right for
each speaker.
3.3 Using the Audio Line-in