Nuvo NV-CR100, Manual

Page: 12 / 31

12
2.2 Connecting the NuVo NV-CR100 Controller to the Gateway
Once the Gateway is physically connected to the network you need to connect the
NuVo Controller to the Gateway. This is done from the control app.
The Controller will prompt you to physically connect the Gateway, see 1.2
Connecting the Gatew ay to the Network. Press the “Connect” button on the
Gateway, as shown in fig. 10. The Controller will indicate a good connection.
Fig. 10
2.3 Advanced Setup
Advanced setup is only required for installations that do not include the wireless
Gateway. T he Zone Players can be wired directly to the home’s network router or a
network switch that is connected to the network’s router, see
1.3 Using the Zone
Player Ethernet Connection . If you are using the Zone Players wirelessly, you
must use the NuVo Gateway.
If you are using the dedicated NV-CR100 NuVo Controller, follow the on-screen
prompts to connect to the appropriate network. This is necessary for communication
when the Gateway is not present.