37
1568913, Edition 2019-06, Version 0
8
Adjustments
en
Figure 21: Changing or dismantling the swivel stop
8.8.5 Changing or dismantling the swivel stop
(See Figure 21)
1. Follow the general safety instructions prescribed in Chapter 8.1 on
page 27.
2. The assignment and size of the setscrew①and the ball stop③for
the different versions of the pendant system and the Drop tube are
described in Chapter 8.8.1, “Versions”, on page 34.
3. Unscrew a setscrew① from the threaded hole ② .
4. Rotate the extension arm, extension arm XL, spring arm or Drop
tube until the ball stop③ in the threaded hole②is visible.
5. Using a telescopic magnet pick-up tool, remove the ball stop③ from
the threaded hole② and keep it in a safe place.
Electric shock hazard
To prevent the internal supply cables twisting off, at least
1 ball stop must be mounted. This individual ball stop
serves as twist protection:
• Mount the swivel stop directly afterwards.
• Mount at least 1 ball stop③in order to restrict the
angle of rotation of the extension arm, spring arm or
Drop tube to 340 degrees.
6. Mount the swivel stop as described in Chapter 8.8.4 on page 36.
3
2
4
1
Nm
1
2
Nm
1
2
Nm
4
1
3
WARNING
Summary of Contents for Navigator Lift 180 Air Plus-Single
Page 7: ...7 1568913 Edition 2019 06 Version 0 en...
Page 56: ...No 1568913...
