Nuvico np p402, User Manual, Page: 52 / 70

User’s Manual | 50

E-Mail Notify
The system can send notifications to an Email address or Advanced Client Software and the Central Management System
over the network. Users
can choose from a selection of different kinds of alarms by pressing “ADD.” Alarms can be generated
by Sensor, Motion Detection, Disk Full, Admin PW Changed, Video Loss, and Power On/Off. By clicking
“Use TLS”, users can
use a public email address such as Yahoo, Google, or Hotmail accounts. Type the NVR name in the
“NVR Name” box. The
NVR name will appear in the email so that users can recognize which NVR sent an email.
N
OTE Configuration
s first priority is always given to “Schedule Setup” of the “RECORD” menu.
Thus, the system will not send an alarm message or email notification upon motion alarm or sensor even
though the user marks the checkbox of the above event selection, unless the
user sets the “Schedule
Setup” in the “RECORD” menu.
For example, if the
user sets “Continuous” only for “Schedule Setup” of the “RECORD” menu and marks
the “All” checkbox in “REMOTE NOTIFY”, then the system will not send alarm messages. In this case, the
user has
to set “C + M”, “MOTION”, “SENSOR” or “C+ S” for REMOTE NOTIFY or E-Mail NOTIFY to
function properly.