Nuvico np p402, User Manual

Page: 32 / 70

User’s Manual | 30
3.12 DST Setting and Screen Saver
DST starts at 2:00 local time on 2
nd
Sunday of March, and ends at 2:00 DST on 1
st
Sunday of November.
During DST (Daylight Saving Time) period, the NVR time clock has to be adjusted according to the regional time zone. That is,
the NVR time clock will be shifted by one hour after the DST settings start, and the NVR will restore the time clock back to
normal after DST finishes.
To enable the DST setting on the NVR, go to the menu: SYSTEM > SYSTEM INFO and click
“DATE/TIME” to get the DST
setting window as shown below. Users can setup DST
“Begin & End” time after checking “USE DST” box.
Since the clock jumps from 2:00 to 3:00, when you go to search mode, you can clearly see there is no data in all channels for
one hour due to DST.
DST ends at 2:00 DST, and the clock jumps backward to 1:00 standard time on 1
st
Sunday of November.
When DST finishes, there is an hour of overlapped video. The overlapped time video will be indicated in a blue color in the
Intelli-Search Bar during playback mode.