Nuvico np p402, User Manual, Page: 45 / 70

43 | FULL HD Network Video Recorder

Motion Area Setup
The default motion area setup relies on the network camera setting and direct control of network camera is supported for
approved models. Choose the desired motion area by dragging a mouse while holding the left mouse button. All zones can be
selected and desired areas are also partially selectable. Only 4 individual zone areas are consecutively available by dragging
a mouse on the motion area. If users select the area one more time, the very first selection will be removed and the very last
selection will be applied. To remove all selections made, click the right button on the mouse and choose
‘Clear All’.
Select also
“Sensitivity” from ‘Lowest to Highest’.

Title
Users can name the camera title.

Covert
“Covert,” also called ‘hidden camera’ feature, hides camera display and playback as if there were no camera recording.
Users
can apply this covert function not only to Live view, but also to Playback view.

Brightness, Contrast, Hue
Adjusting brightness, contrast and hue to camera is available. When setting is done, click the
‘Apply’ button.

Advanced Setup
“Advanced Setup” can be supported by approved cameras only.
Network Type Choose DHCP or Static IP. When choosing Static IP, IP address, Subnet Mask and Gateway will be
activated.
IP Address / Subnet Mask / Gateway Type the IP Address, Subnet Mask and Gateway.
Mac Address Mac Address of the IP camera is not activated.