NUVE NC 300, User Manual

Page: 7 / 35

7

The user shall read the user’s manual prior to initial functioning of the unit. The manual shall
accompany the user until he gains full competency over the equipment.

The user shall immediately notify the technical service in case of improper functioning of the
unit.

Electricity line is suitable for the power of device and correctly grounded power supply should
be used.

Only original spare parts and original accessories supplied by Nüve should be used.

NC 300, NC 430, NC 570, NC 710 steam sterilizers are suitable for the sterilization of textile,
rubber, heat resistant glass, plastics and liquids. Material other than these and heat
susceptible objects shall not be used.

The liquid to be sterilized in the NC 300/430/570/710 sterilizer should have a boiling point of
100 ° C at sea level at 760 mmHg (1 atm) atmospheric pressure.

Proper sterilization program shall be selected in accordance with the load type and the
sterilization load shall be disinfected prior to being placed into the unit.

The heat produced by the sterilizer should be evacuated by a suction type ventilation system.
4.
SYMBOLS AND LABELS
Symbol in the operating instructions:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly
dangerous situations.
The non-adherence to these warnings can lead to material damage and
injury to personal.
Notified Body:
KIWA
Belgelendirme Hizmetleri A.Ş.
(İTOSB) İstanbul Tuzla Organize Sanayi Bölgesi Tepeören Mevkii
34597 Tuzla- İstanbul / TURKEY

Symbol in the operating instructions:
This symbol refers to important circumstances.
Type B protection.
Before operating the instrument this manual should be read carefully.
Labels on the product: