Pro Trio Analyzer Manual
Page
32
NUVAIR
www.nuvair.com
11.0
Pro CO Carbon Monoxide Analyzer
The Pro CO Carbon Monoxide Analyzer measures carbon monoxide (CO) levels in gases in the
range of 0 to 100 parts per million (ppm). Common uses for a CO analyzer are to measure for
CO contamination introduced into gas mixes from internal combustion engines or other devices
where CO is a byproduct. The Analyzer is designed to verify CO concentration in stored gas
cylinders and in the gas flow from a compressor.
Carbon monoxide is a colorless, odorless, tasteless gas that will not support
life. Exposure to carbon monoxide can lead to unconsciousness and death.
This analyzer utilizes an environmentally-sealed internal sensor that samples gases passing
through the input. The operator is notified by the
digital display and the audible and visual alarms.
A gas flow is required to deliver sample gas to
the sensor. Pressurized gases must be
regulated to avoid damage to the analyzer. Use
of this analyzer in a hyperbaric chamber will void
the owner’s warranty.
The Analyzer is ready for use after calibration
with an appropriate certified calibration gas.
This analyzer is designed for use at atmospheric pressures only. It is not designed for
exposures in a hyperbaric chamber. Use of this analyzer in a hyperbaric chamber will
result in incorrect readings and may damage the unit.
Although the Analyzer is a rugged instrument, careless handling or abuse may result in
damage to the Analyzer resulting in inaccurate gas analysis. Inaccurate gas analysis can
lead to serious personal injury or death.
Extreme CO exposure levels directed at the Analyzer sensor may damage the sensor.
Don’t test the sensor in the direct flow of any engine mufflers/exhausts or any other
known high concentrations of CO.
On/Off
Programming
buttons
Digital Display
Alarm Light
Summary of Contents for Pro Trio
Page 1: ...User Manual Pro Trio Analyzer O2 CO CO2 Analyzer REV 03 19...
Page 47: ......
