Pro CO Carbon Monoxide Analyzer
6
www.nuvair.com
2.0 System Description
The Pro CO
TM
Carbon Monoxide Analyzer measures carbon monoxide (CO) levels in gases
in the range of 0 to 100 parts per million (ppm). It can be used to measure the CO content in
gas mixes that may be contaminated due to the introduction of CO from internal combustion
engines or other devices where CO is a byproduct. The Analyzer is designed to verify CO
concentration in stored gas cylinders as well as to monitor enclosed spaces. The Analyzer is
a water and impact resistant unit compatible with outdoor and marine environments.
Carbon monoxide is a colorless, odorless, tasteless gas that will not support life.
Exposure to carbon monoxide can lead to unconsciousness and death.
The Analyzer is battery powered and includes an
internally mounted Sensor with audible alarm. The
Water-Resistant Case includes a Digital Display and
controls that are environmentally sealed
The Analyzer uses a Flow Adapter Cap and Flexible
tubing to deliver sample gas to the Sensor.
Pressurized gases must be regulated to avoid
damage to the analyzer. Use of this Analyzer in a
hyperbaric chamber will void the owner’s warranty.
The Analyzer comes in a high impact storage case.
It is ready for use after calibration with an
appropriate certified calibration gas.
This analyzer is designed for use at atmospheric pressures only. It is not designed for
exposures in a hyperbaric chamber. Use of this analyzer in a hyperbaric chamber will
result in incorrect readings and may damage the unit.
Although the Analyzer is a rugged instrument, careless handling or abuse may result
in damage to the Analyzer resulting in inaccurate gas analysis. Inaccurate gas analysis
can lead to serious personal injury or death.
Extreme CO exposure levels directed at the Analyzer sensor may damage the sensor.
Don’t test the sensor in the direct flow of any engine mufflers/exhausts or any other
known high concentrations of CO.
Flow
Adapter Cap
Over Sensor
Face
Water-
Resistant
Case
