Nuvair Open Electric Models
Nuvair Page 30
www.Nuvair.com
Disassembly and demolition must only be carried out by qualified personnel.
16.2 Dismantling the compressor
Dismantle the compressor in accordance with all the precautions imposed by the laws in force
in the country of use. Before demolishing request an inspection by the relevant authorities and
relative report. Disconnect the compressor from the electrical system. Eliminate any interfaces
the compressor may have with other machines, making sure that interfaces between remaining
machines are unaffected. Empty the tank containing the lubricating oil and store in compliance
with the laws in force. Proceed with disassembly of the individual compressor components and
group them together according to the materials they are made of: the compressor mainly
consists of steel, stainless steel, cast iron, aluminum and plastic parts. Then scrap the
machine in compliance with the laws in force in the country of use.
At every stage of demolition observe the safety regulations contained in this manual carefully.
17.0 Instructions for Emergency Situations
17.1 Fire
In the event of fire use a CO
2
extinguisher in compliance with the relevant standards in force.
Contact the fire department.
