MCH36 Silent Touch
Nuvair
Page 31
www.Nuvair.com
•
Before carrying out any maintenance tasks, run checks and/or controls on the compressor, switch off
the compressor, remove the plug from the mains socket.
•
The residual pressure present in the compressor and all lines must be released.
•
During disassembly and reassembly of the compressor, always use suitable wrenches/tools so as not
to damage the relevant components.
•
Loosen stiff parts with a copper or plastic mallet.
•
When refitting parts make sure they are clean and lubricated sufficiently.
•
Compressor maintenance tasks must only be carried out by authorized personnel and recorded in the
Service Log of this manual.
13.3 Unscheduled Work
Unscheduled work involves repairs and/or replacement of the mechanical parts of one or more compressor
components. This work normally needs to be done after some years of use. If substantial modifications are
made, the manufacturer cannot be held liable for any dangers that might arise. This work must be carried out
by a Nuvair approved mechanic.
13.4 Scheduled Maintenance Table
Maintenance interval times are for typical use and may vary based on the conditions under which the
compressor is used.
Before Every Use
Hours
Hourly Maintenance
5 25 50 100 250 500 1000 2000 3000 4000 5000 20,000
Condensate Container Discharge
Air Intake Filter
Lubricating Oil Level Check
Lubricating Oil & Filter
**
*
Automatic Shutdown Check
1
st
, 2
nd
, 3
rd
Stage Valves
4
th
Stage Valves
Condensate Separator & Filter
Hyperfilter Complete
Separator Filter Element Cleaning
1
st
, 2
nd
, 3
rd
Stage Segments
4
th
Stage
HP Flex Hoses
Fitting/Hose Leak Check
Safety Valve
Coolers Tube
Transmission Belt Wear & Tension
Water & HP Oil Separator
Checking and cleaning
Change
* Nuvair recommends oil changes every 250 hours of runtime, or once per year, whichever is less.
** Change oil every 100 hours when compressor is used with nitrox.