Intelligent Surveillance Solution
System Introduction
page-
7
tool, and press lightly depressing reset located between the
switch (refer page 5). Hold for 3 seconds and release. The Link
and Run light will go out and turn back on. The SCB-C31A POS
will revert to the last setting.
Note:
Every time you change the configuration of SCB-C31A
POS, please check the above settings, especially maximum
connection and Remote IP address to avoid connection fail.
Connection via COM Port
Please install system according to following diagram:
Connection via TCP Client
Please install system according to following diagram:
NUUO NVR/DVR/Hybrid system installation
Please refer to the Main Console user manual to complete system
installation with the NVR/DVR/Hybrid systems installation CD.
