Intelligent Surveillance Solution
Hardware Installation
page-
4
HARDWARE INSTALLATION
SCB-C31A POS data capture convertor
To connect Cash Register, Printer, and SCB-C31A POS data capture
convertor together, please follow below steps:
Step 1: Please refer the user manual to setup Cash Register and printer.
Step 2: Using a “Y-shape” DB-9 cable, one DB-9 female connect to
POS system and one DB-9 male connect to the receipt printer
Y-shape (provided by Printer vendor).
Step 3: Using another DB-9 female connect to SCB-C31A POS Data
Capture R232/Ethernet convertor with Null modem.
Note:
There are two kinds of serial cable: Straight pass-through
and Null-Modem. The connection between SCB C31A POS
Data capture box and Y-cable must be null modem (in
package).
Step 4: Check the system switch of the SCB-C31A POS is switch to OFF,
OFF position.
Step 5: Connect power source with SCB-C31A POS.
Step 6: Connect SCB-C31A POS with internet port by RJ45 LAN cable.
SCB-C31A POS
Cash register
Printer
Null Modem
Y-cable
Ethernet
Provided by printer
F
F
M
M
F
