OPERATION MANUAL
IBS 40002210
Page | 5
V13 (January 2019)
Safety Instructions
This equipment may only be used by trained and skilled personnel. Any application that does not
conform to the specified use is considered hazardous.
The equipment must only be used for its intended purpose; any other application will be
considered improper. The equipment is designed to keep food warm that has been cooked, prior to
display. The equipment is not for cooking.
Heated areas of the Flexeserve Zone® exceed 70°C: only touch the components used to control the
equipment.
The equipment is not to be used for the storage or display of uncooked products. All foods must be
displayed in appropriate sealed containers/packaging.
Food products are to be pre-cooked and displayed in appropriate containers/packaging.
Do NOT place anything greater than 20 kg on to the display surface.
Do NOT cover or block exhaust vents.
Children should not be allowed to play with or near the equipment.
Before using the equipment:
-
Inspect power cable for damage. If damaged, disconnect and isolate the Flexeserve Zone® unit;
-
If the glass display shelf is cracked, isolate the Flexeserve Zone® unit and remove from service;
-
Ensure that there are no foreign or combustible objects other than approved food packaging in
contact with the heated surfaces;
-
Ensure that the display shelf is checked for signs of damage. If any damage is found, isolate the
electrical supply and report to The Alan Nuttall Partnership Ltd Customer Support Department.
Switch off the appliance:
-
When not in use;
-
Before carrying out any maintenance task, such as cleaning;
-
Before moving the equipment.
To ensure that the equipment remains in optimum technical condition, maintenance work should be
carried out at least once a year by a recommended Nuttall Service Partner.
The end user is fully responsible for the fulfilment of locally applicable safety regulations and guidelines at
all times.
Any safety warnings and/or instructions attached to the equipment are part of the safety features. They
must not be covered or removed, and must be present and legible during the life of the product.
Immediately replace damaged or illegible pictograms, warnings and instructions.
