OPERATION MANUAL
FLEXESERVE HUB®
FLEXESERVE® | Operation Manual Flexeserve Hub® | R4 MAR 2021 | 40002982
Page | 21 of 24
Base Tray
Ensure that the unit is empty before cleaning the base tray.
Figure 1
Figure 2
Figure 3
Figure 4
Use the handle to lift out and remove the base tray (Figure 1). Clean using mild detergent and a soft
cloth.
Carefully remove the crumb catcher using the 2 finger holes (Figures 2 & 3). Dispose of crumbs and wipe
over using mild detergent and a soft cloth.
Use a vacuum to remove any crumbs and debris. Wipe over the base fan cover using mild detergent and
a soft cloth.
Wipe the back panel using mild detergent and a soft cloth.
Reassemble the base tray and crumb catcher once the above cleaning process is complete.
Door Seals
The inner door seals will need to be removed for cleaning.
Figure 5
Figure 6
Figure 7
Figure 8
Remove the door seal by carefully pulling the seal outwards from the corner (Figure 5) until it is
completely removed from the door.
Clean using warm, soapy water and a soft cloth. Dry using a soft cloth or paper tower.
To re-fit the seal into the door(s), first push the inside face of the door seal into the groove of the door
(Figure 6). Start this process with both top corners of the door seal (Figure 7).
Using the door seal fitting tool provided, work the seal into the door until it is fully pressed into its
location (Figure 8).