LIMITED WARRANTY FOR NUTRICOOK
Nutricook’s limited warranty obligations are confined to the terms set
forth below:
Nutricook warrants this product against defects in materials and
workmanship for a period of
two years
from the date of original
retail purchase. This limited warranty is valid only in the country in
which the product is purchased and comes with the product at no
extra charge, however shipping and processing fees will be incurred
for returns, replacements and or refunds.
OBTAINING WARRANTY SERVICE
For limited warranty service, simply visit
www.nutricookworld.com
for Customer Service details of your respective territory or contact
our customer service department at
and we will be glad to help you. When you contact our customer
service department you will be asked for your name, address,
telephone number and to provide proof of the original purchase
(receipt) containing a description of the product(s), purchase date,
and the appropriate Nutricook bar code(s). Before you send your
product for limited warranty service please make sure to keep a
copy of all relevant documents for your files (receipt, etc.). It is always
recommended to purchase product insurance and tracking services
when sending your product for service. Remember, shipping and
processing fees will be incurred and are not covered by the two-year
limited warranty.
EXCLUSIONS AND LIMITATIONS
This
Nutricook Two-Year Limited Warranty
applies only to Nutricook
products distributed by or for Nutricook that can be identified by the
“Nutricook” trademark, trade name, logo and bar code.
Nutricook’s
Two-Year Limited Warranty
does not apply to any other products
that may appear to be authentic, but were not distributed/sold by
Nutricook.
Issue
Possible Cause
Solution
Steam escapes from
the pressure release
valve while it is in
Sealing
position.
The pressure release valve is not
properly seated.
Turn the pressure release valve properly to
Sealing
position.
Pressure sensor control is not
working.
Contact Customer Service.
Clicking or light
cracking sounds is
produced.
The power switching and
expanding pressure while
changing temperature can
produce this sound.
This is completely normal. No action required.
Exterior bottom of the inner pot
is wet.
Ensure to wipe the exterior surface of the inner
pot before inserting to the heating element.
LED display
flashes error
codes and
cooker beeps
continuously.
E1
-
Temperature sensor
open circuit
WARNING:
Stop working after these errors appear.
Disconnect from power supply.
Contact customer service.
E2
-
Temperature sensor
short circuit
E8
-
Pressure switch failure
burn
-
Overheat warming
(over 140)
It will stop heating and rework when the
temperature reaches to the normal t level.
Lid
-
The lid is not closed
properly
Reposition the lid and ensure it is properly locked
for all pressure cooking programs.
NOTE
: Do not lock the lid when using the
SAUTÉ
function.
Warranty.
53
52
