*CAUTION:
Inspect the lid to make sure that it is free from any damage
prior to using your pressure cooker.
Open and close lid.
open
Open:
Grip handle and turn lid
in counter-clockwise until (
▼
)
symbol on lid is aligned with
(
▲
) symbol on cooker base rim.
Lift the lid vertically from the
cooker base.
close
Close:
Grip handle and lower
down the lid to cooker base
rim. Ensure that (
▼
) symbol
on lid aligns with (
▲
) symbol
on cooker base rim and rotate
clockwise until (
▼
) symbol on
lid is aligned with (
▲
) symbol on
cooker base rim.
*
NOTE:
If you encounter any difficulty
in opening and closing the lid, refer
to the
Troubleshooting
section of the
User Guide. Always check the cooker
base rim and remove any food debris/
residue to ensure lid will lock properly.
*NOTE:
Make sure that locking
pin located at the back of lid is fully
retracted into the lid. This indicates that
lid is closed correctly.
The unlock icon (
) on top of the LED Screen is always illuminated when the lid is
not properly locked.
Install and remove
sealing ring.
Install:
Place the sealing ring
inside the sealing ring rack and
press into place. Ensure
entire
sealing is snug behind sealing
ring rack. Sealing ring must be
installed before use.
After closing lid, the sealing ring
creates an airtight seal between
lid and cooker base.
Remove:
Gently pull sealing
ring out from sealing ring rack
and clean after every use.
*NOTE:
It is recommended to have
more than one sealing ring. The sealing
ring is an integral part of product safety.
Only use authorized nutricook
®
sealing
ring or Replace your sealing ring every
12-18 months or when deformation or
damage is noticed.
CAUTION:
Always check for cuts or deformations in sealing ring prior to cooking.
Failure to follow these instructions may cause food to discharge, which may lead
to personal injury or property damage.
install
remove
*CAUTION:
Regularly inspect your
sealing ring for any damage as this will
affect the product safety. Sealing ring
may stretch over time. Do not use a
stretched or damaged sealing ring. If
puckering occurs, replace sealing ring.
21
20
