www.NutrichefKitchen.com
15
2. The descaling mixture (water and clearing media) is prepared according to the
mixing ratio of 1:8 and then put into the water tank after an even mixing.
The dosage of descaling mixture in the water tank may not be lower than the
descaling scale of water tank.
3. After the descaling mixture or agent is added into the water tank and the oven
door is closed, press the SELECTION key to select the descaling function and then
press the ENTER key to start the descaling work.
4. The countdown mode is used for the product. When there are still 20 minutes,
the user is reminded to pull out the water tank to drain the descaling agent and
replace the clean water. After the water tank is inserted, the machine begins to
work. When there are still 10 minutes, the user is reminded again to pull out the
water tank to replace the clean water. After the water tank is inserted, the
machine begins to work. After the completion, the user will be prompted.
•
Setting Key function:
1. Presetting Time:
During any program selection or standby mode, Press Setting
Key , it will start preset time setting, and Icon is on, the Hour LED flashing
(Preset time is 0-24 hours adjustable), after hour confirmed, the Minute LED
flashing, after minute confirmed, Interface return to program selection mode,
press key select program, after Program selected, press the ENTER key to
start this selected program Presetting; After presetting time starting, the
preseted time interface and selected program interface will display alternately
every 5 seconds;
2. Time-Delay:
When any program working completed, press this key to enter the
“Time-delay” function, can add time and adjust temperature accordingly, and the
“Time-delay” icon is ON; Press the ENTER key to confirm it.
icon in the screen is
ON, which indicates that the system is in this working status currently.
3. On DIY mode
, press this key to adjust time and temperature any time.
After adjusting the time, press the ENTER key to confirm it and start working;
If the Setting function shall be ended, user can directly press the POWER key to exit
from the setting working mode and the system will automatically return to the
standby interface.
•
Lighting Function
After the key is activated, the illuminating light will be ON for 3 minutes by
pressing the key Lighting/Child Lock, and it will go out by pressing the key again.
•
Children Lock
After entering the working state, children lock icon is ON by holding down the
key Lighting/ Children Lock, and all keys or buttons are locked. They cannot be
unlocked unless user holds down the key Lighting/Children Lock again.
Summary of Contents for PKSTMOVN72
Page 20: ......
