5
www.NutrichefKitchen.com
12
1. DIY Steam
Adjustable temperature range:
120-230°F, with each adjusting scale of 40°F.
In the standby status, open the oven door, take out the water tank to fill the
water to its maximum scale; put in the water tank and food and then close the
oven door.
Press the selection key “ ” to enter the steam mode. At this time, the steam icon
will flash, and the indicator light of water tank/time/temperature is ON. Press
the ENTER key, hour icon will shine. Press the SELECTION key to select the time as
required (default value is 0, ranging from 0-6). After it is selected, press the ENTER
key to enter the minute selection mode and then, the minute icon will flash.
Press the SELECTION key to select the required time (default value is 30, ranging
from 0-59). After it is selected, press the ENTER key to enter the temperature
selection mode and then, the temperature icon will flash. Press the SELECTION
key to select the required temperature (default value is 210, ranging from
120-230). After the selection, press the ENTER key.
If the water tank is not put in or runs out of water, the machine will give an alarm
(icon “ ” flashing and audible alarm); if there is a water shortage alarm, please
open the oven door to add water and then close the door to automatically start
the work.
After the steam function is completed, the user shall be prompted to drain the
residual water from the water holder and icon will flash on the screen to
remind the user to drain the residual water from the water holder.
After the end of the cooking, the buzzer will beep for 10 times and then stop.
Afterwards, user can open the door to take out the food. If there is no operation
within five minutes, the system will automatically return to the standby interface.
2. DIY Other Roast Modes
Adjustable temperature range:
210-450°F. The default working temperature is
360 °F, and the time is adjustable.
Open the oven door in the standby state, put in the food and then close the
door. Press the Selection key to enter the roast mode. The icon of this mode will
flash, and the indicator light of time/temperature is ON. Press the ENTER key, the
“hour” icon will flash. Press the Selection key to select the required time (default
value is 0, ranging from 0-3). After it is selected, press the ENTER key to enter the
Summary of Contents for PKSTMOVN72
Page 20: ......
