NUTRICHEF PKMRC46, Manual

Page: 3 / 7

TIME button

After press MENU button to select the cooking mode, press the TIME button could adjust the desired
cooking time under setting.
Prepare to cook
Before First Use

Read all the instructions and important safeguards.

Remove all packaging materials; make sure items are received in good condition.

Place multi-cooker on a flat, heat-resistant and non-flammable surface.

Remove any stickers from the surface of the cooker and wipe the surface clean with a damp dishcloth.

Wash all the accessories with warm soapy water using a sponge or dishcloth.

Rinse well to remove soapy residue, then dry thoroughly.

Do not use abrasive cleaners or scouring pads.

Do not immerse the appliance, cord and plug in water at any time.
Power Up

Always check to see if the electric cord or plug is damaged before use.

Attach plug to appliance first, then plug cord into the wall outlet.

You will hear a beep and the cooker will enter into the standby mode.

The LED display will show
”- - - -“ and means the cooker in standby mode.

The cooker is now ready for cooking.
General Operation Guide
1. Prepare the food you want to cook according to the recipes.
2. Put food into the cooking pot.
3. Press
MENU to select a cooking mode according to the recipes.
4. Press the START to start the cooking process immediately.
5. After finished cooking, press the WARM/CANCEL button to turn off the unit.
Note:
To cancel an activated program, simply press WARM/CANCEL button. The cooker will go to standby
mode. You can start to program again.
Cooking mode
GRAIN
mode
1. Prepare food for GRAIN according to recipe.
2. Place the removable cooking pot in its place.
3. Press
MENU button until the indicator light for
“
GRAIN
” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press
START button, the cooking time will start counting down.
6
When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from
“ 0000 “
7 Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to
24hours.
PILAF mode
1. Prepare food for PILAF according to recipe.
2. Place the removable cooking pot in its place.
3. Press
MENU button until the indicator light for
“
PILAF
” is on, the LED display will show the default
cook time.
4. Adjust the cooking time if desired.
5. Press
START button, the cooking time will start counting down.
6.
When the cooking time ends, the cooker will beep and go automatically to the “keep warm” mode.
The LED display will show warm time running from
“ 0000 “
7. Until you press WARM/CANCEL button to cancel the program, the food will keep warm for up to 2
4hours.
FRY mode
MAKE SURE THE LID IS OPEN FOR FRY