www.NutrichefKitchen.com
5
GETTING STARTED
Before your first brew:
•
Close the tap. Add about 5-10 litres of water to the brew kettle.
•
Place the lid on top of the boiler and connect the power cord to a wall outlet. The built-in light in the
brew program selector will now illuminate.
•
Switch the brew program selector to “II” and press “RUN” button on the brew controller.
The display light will now illuminate. This will initiate heating of the water to 100°C or 212°F.
Wait until the water is boiling.
USING THE HOME BEER BREWING MACHINE
This chapter will explain brewing in general, and how to use the brew controller and the program
selector switch during brewing.
It is suggested to have a pump to connect the tap and make the circulation and lautering so that you can
have good performance and beer.
UNDERSTANDING THE HOME BEER BREWING MACHINE CONTROLLER:
The
Home Beer Brewing Machine
has an easy to use built-in controller that has been designed to
support the three phases of brewing described above. Each phase is completed by basically heating up
and maintaining temperatures, where each phase has a different function in the beer brewing process.
Malt basket placed on the top bracket
