www.NutrichefKitchen.com
4
BEFORE ASSEMBLY
CAREFULLY READ AND PERFORM ALL ASSEMBLY
INSTRUCTIONS ON THE FOLLOWING PAGES.
Tools Required:
•
Adjustable wrench (not provided)
•
Screwdriver (not provided)
•
7/16” Combination wrench (not provided)
•
The following hardware is provided in blister pack
for convenient use.
1. Bottom Shelf
• Turn bottom shelf upside down. Attach the casters to bottom shelf with (16) M6x13 screws.
Note:
Install each caster into the correct position as shown in the figure below.
The standard caster (non-swiveling) will only install in one direction.
• Turn bottom shelf right side up. Attach door magnets to bottom shelf with (2) M4x10 screws.
M4X10 screw Qty: 2 pcs
M6X13 screw Qty: 16 pcs
M4X10 screw Qty: 36 pcs
AAA Battery Qty: 1 pcs
M5X10 screw Qty: 4 pcs
M6X13 screw Qty: 32 pcs
M5 flat washer Qty: 4 pcs
M6 compression washer Qty: 8 pcs
BEFORE ASSEMBLY
ASSEMBLY
