Care & maintenance.
new Extractor Blade at nutribullet.com or contact
Customer Service.
• Dry the Extractor Blade completely. It is helpful
to turn the Extractor Blade on its side in your dish
drainer to ensure
BOTH SIDES
of the Extractor
Blade are completely dried.
NUTRIBULLET
®
CUPS & TO-GO LIDS:
• These items are all
TOP RACK
dishwasher safe.
We recommend rinsing them and giving them a
quick brush with a dish brush to remove any dried
debris before washing them in the dishwasher.
NEVER
use the sanitize cycle to wash the
nutribullet
®
Cups as this may warp the plastic.
• Regularly check the 3 tabs on the side of the
nutribullet
®
Cups (cracking, crazing, breakage or
rounding). If damaged, replace immediately to
prevent possible personal injury.
• NEVER USE A CUP WITH A BROKEN, DAMAGED,
OR MISSING TAB AS DOING SO MAY CAUSE THE
CUP AND MOTOR BASE TO SEPARATE EXPOSING
THE BLADE ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the nutribullet
®
Cup,
make your cleanup a snap by filling the cup about
2/3 full with room temperature (21°C/70°F or less)
water and screw on the Extractor Blade. Place the
nutribullet
®
Cup/Extractor Blade assembly on the
nutribullet
®
Motor Base for about 20-30 seconds.
This will loosen the stuck ingredients, and with a
light scrub and rinse, you’ll be all finished.
Here’s how to clean the
nutribullet
®
:
STEP 1:
The most important thing — ALWAYS UNPLUG the
Motor Base from the power supply outlet when it is
left unattended, before assembling, disassembling,
changing accessories or approaching parts that
move in use, or when cleaning.
Do not attempt to
handle the appliance until all parts have stopped
moving!
STEP 2:
Remove the nutribullet
®
Cup/Extractor Blade assembly
from the Motor Base.
STEP 3:
Clean the individual components (Motor Base, Extractor
Blades, nutribullet
®
Cups) as follows:
MOTOR BASE:
• For the most part, the Motor Base doesn’t really get
dirty, but if you neglect to twist the Extractor Blade
on to the nutribullet
®
Cup tightly, liquids can leak
out and get into the Motor Base and stick to the
activator buttons.
• To avoid risk of injury,
NEVER
use your hands or
utensils to clean the white actuator Tabs while the
nutribullet
®
is plugged in.
• Do not remove the rubber or plastic liners inside
the Motor Base.
• Use a sponge or dish cloth dampened with warm
soapy water to wipe down the inside and outside of
the Motor Base until clean.
• Pay particular attention to the white actuator tabs
on the inside of the Motor Base to loosen any sticky
debris from drips and spills. If necessary, you may
use a small brush to scrub the area to ensure it is
kept clean.
WARNING:
Never submerge the Motor Base in
water.
EXTRACTOR BLADE:
•
DO NOT REMOVE THE GASKET
as this will
permanently damage the Extractor Blade and
cause leakage. If after washing as indicated
above additional disinfecting is desired, you
may rinse with a 10% vinegar/water solution
or with lemon juice. If, over time, the gasket
becomes loose or damaged, you may order a
Cleaning the nutribullet
®
is easy, simply place any of the
pieces (except for the Motor Base and Extractor Blade)
on the
TOP RACK
of the dishwasher or hand wash with
warm soapy water and rinse.
9
2022-07-26 NB Pro Pulse UG V03.indd 9
2022-07-26 NB Pro Pulse UG V03.indd 9
18-08-2022 15:14
18-08-2022 15:14
