CAUTION: Do not run the Motor Base in excess of 1
minute per interval. Do not run the Motor Base for more
than three 1-minute intervals without allowing it to cool
for 2-3 minutes after the third extraction. Running the
motor for more than 1 minute consecutively in any interval
may warm the ingredients and pressurize the nutribullet
®
Cup. Friction from the rotating Extractor Blade when
extracting can cause ingredients to heat and generate
internal pressure in the sealed vessel. If the vessel is warm
to touch, allow to cool before carefully opening pointed
away from your body.
Place the Extractor Blade
onto the nutribullet
®
Cup
and twist until it is tightly
sealed.
Turn the nutribullet
®
Cup
upside down and place
it onto the Motor Base.
Gently push and twist,
60-second auto blending
cycle will be activated.
The blue light and unit will
shut off once auto-mode is
completed.
Unlock the assembly
by gently pushing and
untwisting the cup
counterclockwise.
Once the Extractor Blade
stops completely, remove
the nutribullet
®
Cup from
the Motor Base. Enjoy!
Add ingredients* to the
nutribullet
®
Cup.
To Pulse, push and twist
the nutribullet
®
Cup onto
the Power Base. Press
the Pulse Button within
5 seconds of blending,
which will pause current
blending cycle to activate
manual pulse mode.
1
1
5
4
2
2
3
3
nutribullet
®
cup
assembly.
The Pulse Button will fl ash
BLUE indicating that it's in
Pulse Mode.
NOTE:
Pulse Mode is active
for 1 minute and then times
out. If the Vessel is still in
the ON position, nothing will
happen. The Vessel must be
rotated counter-clockwise
to OFF position and then
normal function may be
resumed.
Pulse mode.
Because the nutribullet’s motor is so powerful, it
emulsifi es the ingredients when you extract. That is
why when you want to make foods such as chunky
salsa, or coarse chopped onions, Pulse Mode is
key. Pulsing takes a tiny bit of getting used to, but
once you get a feel for it, you’ll be a Pro in no time!
pulse
button
PULSE
PULSE
Press and hold the Pulse
Button to make the Blades
turn. Release the Pulse
Button to stop the Blades.
Let the Blades come to a
complete stop after each
Pulse and press the Pulse
Button again until you get
the consistency you desire.
CAUTION: Do not run the Motor Base in excess of 1
minute per interval. Do not run the Motor Base for more
than three 1-minute intervals without allowing it to cool for
2-3 minutes after the third extraction. Running the motor
for more than 1 minute consecutively in any interval may
warm the ingredients and pressurize the nutribullet
®
Cup. Friction from the rotating Extractor Blade when
extracting can cause ingredients to heat and generate
internal pressure in the sealed vessel. If the vessel is warm
to touch, allow to cool before carefully opening pointed
away from your body.
PULSE
8
2022-07-26 NB Pro Pulse UG V03.indd 8
2022-07-26 NB Pro Pulse UG V03.indd 8
18-08-2022 15:14
18-08-2022 15:14
