9
8
Assembly
1
Place the
Motor Base
on
a dry, level counter top.
Ensure the dial is set to the
"OFF"
position and the unit is
unplugged.
2
Place the
Pulp Basin
on top of
the Motor Base. Align the
Pulp
Basin
with the Motor Base so
that the spout is aligned with
the dimpled side of the Motor
Base.
3
Align the
Sieve
with the motor
drive coupling and push
down until it clicks into place.
Handle the
Sieve
by gripping
the top edges being careful
not touch the sharp teeth on
the base of the
Sieve
. Ensure
the
Sieve
is properly seated
in place and securely inside of
the Pulp Basin.
4
Place the
Basin Cover
over
the Sieve and Pulp Basin.
The side “ears” on the
Basin
Cover
should align with the
“ears” on the sides of the Pulp
Basin.
5
Raise the
Locking Handle
and
move it into the "ears" on each
side of the Basin Cover. The
Locking Handle
should be in
a vertical position and locked
into place.
NOTE:
if the
Locking Handle
is not
securely in place, the juicer will not
power on.
6
Swing the
No-Drip Spout
cover up vertically, so that it
is no longer covering the juice
spout.
7
Place the
Juice Pitcher Lid
on
top of the Juice Pitcher and
open the locking lid latch.
8
Slightly angle the
Juice
Pitcher
and place it under the
juice spout. Align the spout
with the hole in the
Juice
Pitcher Lid
and level out the
Juice Pitcher
. It will fi t snuggly
into the spout to hold it in
place.
Summary of Contents for Juicer NBJ200G
