4
Fit the vessel Blade-side down onto the Power
Base, aligning the actuator tabs. Press down to begin
extraction, gently rotating the Cup clockwise to lock
the cup in place. Extract for no longer than 1 minute. If
more extraction is needed, wait 1 minute, then repeat
the extraction process in 1 minute intervals up to three
times as needed to achieve the desired consistency. If
more than three 1-minute extractions are needed, allow
the Power Base to cool for 2-3 minutes after the third
extraction before beginning the next round.
NOTE:
If the unit is not allowed to cool as instructed, a
safety feature triggers that will power off the unit and
temporarily render it non-functioning. To reset this safety
feature, simply unplug the unit for 15 seconds and plug it
back in. Unit will resume normal function.
3
Twist the
Extractor Blade
onto the Colossal Cup
and hand-tighten to
make sure the vessel has
been sealed.
24
25
