Page 4
MODEL QTN130LE1
SERVICE PARTS
99045226A
Key No. Part No.
Description
1
97016466
Housing
2
97018562
Duct Connector - 6”
3
98010102
Wiring Plate
4
99170245
Screw, #8-18 X .375
5
97018011
Wire Panel/Harness Assembly
6
97019537
Blower Assembly
7
97018428
Grille Assembly
(includes key nos. 8 & 9)
8
99140199
Grille Spring (2 req’d)
9
99111512
Lens
10
97018014
Spacer (2 supplied)
11
99420665
Thumbscrew, #8-18 x .375
12
475
Duct Reducer - 6” to 4”
13
99271381 Bulb, GU24, 18W Fluorescent (2 req.)
SERVICE NOTE
To remove
Blower Assembly:
Unplug motor.
Remove
thumbscrew (11)
from motor plate
flange.
Find the single
TAB on the
motor plate
(located next to
the receptacle).
Push up near
motor plate tab
while pushing
out on side
of housing.
Or insert a
straight-blade
screwdriver into
slot in housing
(next to tab) and
twist screwdriver.
Order service parts by “Part No.” - not by “Key No.”
9. Remove
light lens.
Carefully insert a
small flat-blade
screwdriver
between grille
and lens. Pry
lens out.
8. Push grille
against
ceiling.
10. Install light
bulbs.
Product includes (2)
18W (max.), type GU24
fluorescent lamps with
M.O.L. (maximum
overall length) of 3.9”
(100mm) as illustrated
below.
Purchase a 4W (max.),
type C7 incandescent
night light bulb.
Insert lamps and bulb
into their sockets.
Replace lens.
Replacement parts can
be ordered on our web-
site. Please visit us at
www.nutone.com
3.9" (100mm) M.O.L.
